Ukulele D tuning: reentrant A D F♯ B
D6 ukulele tuning is A4 D4 F♯4 B4, from the fourth string to the first. It is the traditional reentrant GCEA pattern moved up one whole tone, associated with soprano ukulele methods and the Doane teaching tradition.
Open notes and frequencies
Ukulele D tuning: reentrant A D F♯ B: Sounding targets · Standard D6, reentrant (A D F♯ B) · A4 = 440 Hz.
| String / course | Note | Hz |
|---|---|---|
| 4 | A4 | 440.00 |
| 3 | D4 | 293.66 |
| 2 | F♯4 | 369.99 |
| 1 | B4 | 493.88 |
How to use it
- Choose the tuning, target or note convention described below. Set the reference A to match your ensemble before comparing pitches.
- Press Turn on microphone and allow microphone access. Work in a quiet place and sound one note at a time.
- Let the attack pass and compare a steady note, its octave and cents. Make a small adjustment, then repeat the measurement.
- Check the full instrument again after adjustments. Stop the microphone when you finish; reference tones and the guide remain available.
Help and explanations
Tuning and register
The fourth A is high, above the third-string D, so the targets are deliberately not in ascending pitch order. This is neither drop D nor an open-D guitar chord. Match your strings and instrument to D tuning before increasing tension; a low-G string set is a different setup. Tune each string separately, return to Auto after a manual check and finish with a familiar chord transposed for this tuning. The chart includes octave numbers to prevent substituting low A3 for reentrant A4.
Getting a steady reading
Place the microphone close enough to hear a clear tone, without touching the instrument. Stop reference playback before listening through the microphone. A room echo, another player or a strong overtone can make the detected octave jump. Repeat a short, steady sound and compare by ear before making another adjustment.
Tips
- Match the note letter and the octave, not only the needle position.
- Use the pitch and stringing intended for your model; a chart for another size can imply a different register.
- Return to the same reference A when playing with other musicians.
Frequently asked questions
Do I need to install an app?
No. The tuner works in a current browser with microphone permission. The audio is analyzed on your device and is not recorded or uploaded.
What does zero cents mean?
It means the measured pitch matches the selected reference. For a tradition with different intervals, use the intended cents offset and confirm the musical relationship by ear.
Why does the note or octave change?
The microphone can pick up an overtone or another sounding string. Isolate the note, reduce background sound and wait for a stable reading before changing the instrument.